To ensure the proper functioning of the lil SOLID 2.0 device, in terms of experience and durability, it is recommended to use it with specially designed Fiit tobacco sticks.
The device is in sleep mode and cannot work unless it is first activated for first use. To wake the device press the button for 2 seconds or connect the charger to the charging port. Bring the device to full charge from an electrical outlet before using it for the first time. Full charging takes approximately 2 hours.
How to use it?
Slide and open the cover of the stick insertion compartment on the top of the device.
Insert a Fiit for the tobacco stick into the stick insertion slot, with the tobacco part facing down, and push the stick until it touches the bottom of the slot.
Press the button for 2 seconds until vibration occurs. State LED blinks in ice blue and the device vibrates simultaneously. Pre heating takes about 25 seconds depending on the use environment.
When the preheating process ends, the State LED lights come on and vibrations occur simultaneously to indicate that the tobacco stick is ready for use.
The device with the inserted tobacco stick is ready for use.
For more detailed info check the dedicated section.
*the duration of the battery may depend on its wear and usage mode.
The charging status of the device is displayed as follows: Blue Light (100 ~ 60% charged), Ice blue Light (60 ~ 30% charged), Orange Light (30 ~ 1% charged), Red Light – (needs to be charged).
While charging, the status LED blinks. When charged, the light goes off.
- Press the Button for 8 seconds (even if vibration occurs within 2 seconds)
- The State LED will blink twice in red, orange, ice blue and blue, sequentially.
- When the device is reset, the State LED lights in ice blue for 1 second, and vibration occurs twice, simultaneously.
- To use the Cleaning Wiper, gently snap open the side with the ⊙ mark.
- Remove the cap from the device
- To use the Cleaning Brush, gently snap open the side with the ҈ ( ) mark.
- Insert the Cleaning Wiper into the device and clean the device by spinning the cleaning wiper. Repeat this steo with the cleaning brush.
-
For a better experience, it is recommended that be cleaned after every 20 uses.
If you need more detailed information, check the dedicated section.
Oppure:
- Contact our Call Center number800 22 60 42– every day from 7 AM to 10 PM
- write and e-mail to servizioclienti@iqos.it
- Live Chat on iqos.com – everyday from 9 AM to 8 PM
If you continue to use the device without removing the debris or remnants, the device can heat up the remnants, which can produce the lingering smell.
- You are using the Fiit tobacco stick and not any other brands or products
- You have correctly inserted the new Fiit tobacco stick in the lil SOLID 2.0 SOLID device without breaking or turning the tobacco stick
- You clean your lil SOLID 2.0 SOLID regularly (every 20 sticks)
- You allow the device to pre-heat for about 25 seconds prior to puffing
- You pause between puffs to allow the pin to properly heat the tobacco and generate aerosol
- Both devices evenly heat the respective tobacco sticks in use. For proper functioning of the devices, the SOLID should be used with Fiit tobacco sticks and IQOS 3 DUO with HEETS tobacco sticks.
- Lil SOLID 2.0 is a practical and easy to use, reliable all-in-one device that allows 25 uses with a single charge. IQOS is our most advanced device in terms of design and ergonomics, offering numerous customization possibilities and access to a series of exclusive privileges.
- Whether you choose the SOLID or IQOS 3 DUO, both are smoke-free products and represent a valid alternative to continuing to smoke. Both products are not without risk and provide nicotine, an addictive substance.
The accessories available are:
- Styler deco (Available in different colors for customization)
- Cap
- The AC power adapter and the USB cable
- Dual Cleaner for device mainteinance
In addition to our efforts to develop and market our range of smoke-free alternatives to cigarettes, lil SOLID 2.0 'marketing further strengthens our portfolio of smoke-free alternatives, giving adult smokers a wider choice in terms of tastes, prices and technologies.
For far in Italy the variants Fiit REGULAR and Fiit MARINE are available.
In cigarettes, the tobacco is burnt, whereas with Fiits it is heated when used with the lil SOLID 2.0.
Because lil SOLID 2.0 SOLID heats the tobacco rather than burning it, using Fiit you will have: less persistent smell than cigarettes *, the taste of heated tobacco without ash or smoke.
*Source: Study conducted in Russia with 326 legal age smokers and heated tobacco users, September 2020.
Fiit tobacco sticks have been specially designed for use with the lil SOLID 2.0 SOLID device.