Your first steps
with Lil SOLID Ez

How to use your Lil SOLID Ez

1. Make sure that the device is turned on by pressing the button briefly, in the same way you can check the battery level.

2. Slide the lid of the stick insertion compartment and insert a tobacco stick for Lil SOLID Ez with the tobacco part facing down.

• Turn on Lil SOLID Ez by pressing the on/off button for 2 seconds until you feel a vibration.
• From this moment, the device will flash with a blue light for about 25 seconds to preheat.
• Once the preheating process is finished, the blue light is turned on and the device vibrates simultaneously. This indicates that the preheating process is finished and the stick is ready for use.

3. Each experience lasts up to 5 minutes or 14 puffs, depending on the event that occurs first.

• To report the last 30 seconds of the session or the last 3 puffs, depending on the event that occurs first, the device will emit a vibration and the status LED will flash in blue until the end of the session.

4. Once your experience is finished, the status LED and the device will automatically turn off. Rotate the stick in the same direction 3 times or more, pull the stick out of the device and close the cover to prevent foreign particles from entering. The device is ready to be reused.

• Tobacco sticks specially designed for Lil SOLID Ez can only be used once. Do not re-insert a used stick into the device.

Watch the tutorial to learn more about how to use your Lil SOLID Ez.

How to clean your Lil SOLID Ez

You can clean your Lil SOLID Ez in 3 different ways:

- Cleaning with the included Dual Cleaner

Before proceeding, remember to always turn off the device and let it cool for 5 minutes.

1. Open the lid of the Dual Cleaner cleaning tool.

2. Remove the cap from the device.

3. Fit the hard part of the Dual Cleaner onto the tip and rotate to clean it.

4. Rotate the toothbrush to clean the inside.

- For a more thorough cleaning of your Lil SOLID Ez use the Dual Cleaner Pro tool that removes even the most stubborn residues

Before proceeding, remember to always turn off the device.

1. Open the lid of the Dual Cleaner Pro cleaning tool.

2. Remove the cap from the device.

3. Insert the Dual Cleaner Pro’s perforated brush on the tip and rotate several times to remove the scale.

4. Use the sharp brush to clean the inside of the cap: Insert the cleaning tool to the bottom of the cap and rotate it several times.

Use cleaning sticks to reduce residual tobacco odors after putting back the scale. For the best experience, clean your device for every 20 uses.

The Dual Cleaner Pro thorough cleaning accessory is to be purchased separately.

- Finally, you can also clean your Lil SOLID Ez with heat:

1. Press the power button 5 times.

2. The orange light will flash for 90 seconds and cleaning will proceed automatically.

3. Once the cleaning is finished the light will turn off, you will feel 2 vibrations.

Watch the video tutorial to learn more about how to clean your Lil SOLID Ez.

YOU&IQOS

Everything you need to get the most from your IQOS or Lil SOLID Ez.

Discover more