How to Use Your BONDS by IQOS

1. Turn on BONDS by IQOS: Make sure your BONDS by IQOS is sufficiently charged before starting your experience. Before first use, charge it with the supplied charging cable and a certified and compatible AC power adapter for approximately 180 minutes. Press and hold the button for 4 seconds until the device vibrates, then release it. The lights will slowly turn on or off.

2. Insert the tobacco stick: Insert the specially designed stick up to the line printed on the filter.

3. Start heating: Press and hold the button for 4 seconds until the device vibrates, then release it. The lights will slowly turn on (or off). Wait for the next vibration.

4. First puff: After the second vibration, take a single puff to prime the device. Then wait for the third vibration.

5. Start of the experience: After about 30 seconds of warming up, the device will vibrate again with a third vibration, and the device is ready for use. You have about a 5-minute experience.

6. End of the experience: During use, the lights indicate the remaining time. To signal the last 30 seconds, the device will vibrate once and a white light will flash. At the end, remove the used stick and dispose of it according to local regulations.

Note: Do not remove or twist the stick during the experience.

Check the Battery Status

With BONDS by IQOS, you can easily keep track of the device’s battery level. Briefly press the button and the lights will turn on to indicate the charge level:

1 white = 25% charged

2 white = 50% charged

3 white = 75% charged

4 white = 100% charged

When the battery is fully charged - 4 lights are on solid for 3 seconds, then slowly fade out